Education

How to Use and Activate Crystals and Stones

How to Use and Activate Crystals and Stones – There are a lot of people who use crystals to calm their mind, body, and soul. There are some people who think that crystals send out natural vibrations into the world.

Before a person buys a crystal, it often travels a long way from the source to the seller. Each time the stone changes, it is exposed to energies that may not be in line with your own.

These stones are also said to help you get rid of the negative energy you’re trying to get rid of when you use them for healing.

Keeping your stones clean and charged is the only way to get them back to their natural state. This act of care can also make you feel more like you have a reason to live.

Here, we’ll talk about some of the most common ways to clear your space, how to align a crystal with your goal, and more.

How to Use and Activate Crystals and Stones

1. Use Running water

One major way to use and Activate Crystals and Stones is by holding your crystal under running water which is a highly effective cleaning approach. Then, ask the Universe to remove all of its negativity while you are doing this. While doing this, you will visualize a ray of white light surrounding the stone, cleaning it and imparting it with wisdom and knowledge.

Water is said to get rid of any bad energy inside the stone and send it back to the earth. This is what people believe. However, you can also wash your stone under the faucet to get rid of dirt.

Crystals

Regardless of where your water comes from, make sure your stone is completely submerged. When it’s done, pat it dry.

Estimated Time: The time for each stone is about one minute.

Use this for Stones that are hard to break, like quartz.

Don’t use this for Make sure you don’t use this for stones that are very hard or very soft, like halite or selenite.

2. Salty water

Salt has been used for a long time to get rid of bad energy and make things better.

If you live near the ocean, think about getting a bowl of fresh saltwater. You can also add sea or rock salt to a bowl of water.

Make sure that your stone is completely submerged, and let it soak for a few hours to a few days to let it get soft. Rinse and pat dry when you’re done.

The approximate length of time: up to 48 hours

This is good for stones like quartz and amethyst.

These aren’t stones you should use this on: stones that are soft or porous, or that have small amounts of metals, like malachite, selenite, and angelite.

3. Brown rice

Draw out the bad feelings in a safe and contained place with this method, as well. It’s especially good for stones that protect you, like black tourmaline.

Crystals

Place your stone in the bowl of brown rice. Then fill the bowl with the rice. The rice should be thrown away right away after the cleansing because the rice is said to have taken in the energy you’re trying to get rid of.

Estimated time: 24 hours

Used on: any stone

4. The natural light is good for your health and your skin

It is common for ritual cleansing to happen at certain points in the solar or lunar cycle. You can set your stone out at any time to clean and recharge it.

After dark, put your stone outside. You should be able to bring it inside before 11 a.m. This will let your stone get a lot of light from both the moon and the sun.

Make sure you come back in the morning to get the stone.

Read What you should know before applying the henna on your hair

If you can, put your stone on the ground. Here, we’ll be able to do even more clean-up. Wherever they are, make sure that they won’t be disturbed by wildlife or people walking by.

Afterward, give the stone a quick rinse to remove any dirt and debris. Pat yourself dry.

Approximate duration: 10 to 12 hours

Use this for: most tumbled stones

Bright stones, like amethyst, that can be seen in the sun; soft stones, like celestite and halite that can be damaged by bad weather.

5. Sage

Sage is a plant that has a lot of healing properties. Sage is a sacred plant. Smudging your stone is said to get rid of bad vibrations and bring back its natural energy.

You need:

  • a firesafe bowl
  • Sage that is loose or bundled in a lighter

If you can’t smudge outside, make sure you’re near a window. This will let the smoke and bad energy go away.

When you’re ready, ignite the tip of the sage with the flame. Keep your stone in your non-dominant hand and move it through the sage with your other hand.

As long as the smoke is around, let it stay there for about 30 seconds. If it’s been a while since your last cleaning, or if you think the stone is holding on to a lot, you might want to smudge for an extra 30 seconds.

Duration: About 30 to 60 seconds for each stone.

Use on : any stone

6. Sound

Sound healing allows a single pitch or tone to wash over an area, bringing it into the same vibration as the tone.

Chanting, singing bowls, a tuning fork, or even a nice bell can be used to do this. It doesn’t matter what key the sound is in, as long as the sound is loud enough for the vibration to reach all the way to the stone.

For crystal collectors who have a lot of crystals that can’t be moved or kept track of, this is the best way to do it.

Estimated time: 5 to 10 minutes.

Use on : any stone

Read Advantages & Disadvantages of Tribunal over Court system

7. Using a bigger stone is the best way to get the job done

There are a lot of different tools you can use to get smaller stones out of the way, like large quartz clusters and amethyst geodes.

Place your stone right next to or inside one of these stones. Thought to be true: It is thought that vibrations from a larger stone help to remove unbalanced energies from a smaller stone that is sitting on top of them.

Estimated time: 24 hours

Use on : any stone

8. Make the stones smaller

Making the stone smaller is another effective method of how to use and activate crystals and stones.

Carnelian, clear quartz and hematite are also said to be good for clearing things up.

This is because these stones are usually small, so you may need more than one to clear other stones.

Place the clearing stones in a small bowl. Then, put the stone you want to restore on top of the clearing stones.

Estimated time: 24 hours

Use on: any stone

9. Breath

Breathwork can also be a good way to get rid of things.

If you want to start, hold the stone in your dominant hand first. For a moment, think about your goal and deeply inhale through your nose.

Close your eyes and breathe short, forceful breaths through your nose and onto the stone. This will raise the stone’s vibration.

The time for each stone is about 30 seconds.

Use this for Small stones.

10. The ability to see things

Even though this is thought to be the safest way to clear stones, it can be scary for some people. How in touch you are with yourself may make it easier to direct your energy to the stone you want to fix.

To ground and center your energy, lay down on the ground for a few minutes. Then, pick up your stone and visualize your hands filling with bright white light.

Take a look at the stone and feel it getting brighter in your hands. Imagine the impurities coming out of the stone, making the stone shine brighter with a new sense of purpose.

Then, keep picturing the stone until you feel a change in its energy.

The time for each stone is about one minute.

Use on : any stone

In Conclusion, we have been able to learn various ways on How to Use and Activate Crystals and Stones.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button
error: Content is protected !!